SUBMISSION GUIDELINE
Template
Download (WORD)
Template
Download (LaTex)
Online
Paper Submission
NOTE: The APSIPA ASC 2024 is planned for a physical conference. As per the
current plans, presenters or authors are expected to attend the conference in person,
unless they are subject to personal health, VISA, or national restrictions that prevent
them from doing so.
Final Manuscript Guideline
Final Version Submission- Please revise your paper according to the comments of the reviewers and submit the final paper on CMT.
- Please ensure your final paper is 4-6 pages (including everything).
- All the papers must go through the file conversion offered by IEEE PDF eXpress. You can refer
to the link here: https://ieee-pdf-express.org/. The Conference ID is
63619x.
* First-time users should do the following:
- i.Select the New Users.
- ii. Enter the following:
- 63619x for the Conference lD
- your email address
- a password
- iii.Continue to enter information as prompted.
(An Online confirmation will be displayed and an email confirmation will be sent verifying your account setup.)- iv. Make sure to approve your paper for collection (Then, the status of the paper
should be “PDF Passed PDF Check; PDF is lEEE Xplore-compatible")
- Please ensure that the author names and order of your final version must be consistent with the initially submitted version.
- Please take notice that the final paper should be submitted by October 12, 2024.
- Most importantly, after submitting the final paper, please ensure that the similarity score is less than 33%. According to IEEE regulations, any paper with a similarity score of more than 33% will be withdrawn and must be reported to IEEE.
- Before uploading the final paper, please ensure you process the copyright. The IEEE copyright submission can be done at CMT online.
- The registration system ( http://www.apsipa2024.org/registration.html) is now open. Each paper should be registered with the Full Registration Rate before October 13, 2024. Each Full Registration can include a maximum of 2 papers. Any paper without registration will be automatically withdrawn. Please note that the Student Rate cannot be used to register papers.
- With all your cooperation, the scientific program will be announced in the end of October.
Submission Guideline
Papers must be formatted according to the instructions in the APSIPA 2024 Paper Kit (Please refer to the related information below).Please read the entire paper kit carefully to verify that your paper document is formatted correctly and that you have all the information you need before starting your paper submission. The paper kit contains detailed instructions on formatting your document and completing the submission process, as well as a description of how the review process works and how to prepare for your presentation at the conference if your paper is accepted.
For Full paper submission:
– minimum number of pages is 4 pages (including everything)
– maximum number of pages is 6 pages (including everything)
Full Papers must be compatible with IEEE Xplore format. Papers that not fit with the format cannot be published in IEEE Xplore.
**ONLY PDF FILE IS ACCEPTED**
APSIPA 2024 Paper Kit
*Click the title for more informationProcedure
- Initial Submission
- Authors who wish to participate in the conference must submit a manuscript (minimum of four pages; maximum of six pages; including everything;) consisting of a complete description of their ideas and applicable research results. Detailed specifications for the submission content and format are provided below.
- The manuscript is to be submitted electronically through the
website. This abstract must be submitted by
July 21August 5, 2024. - The status of all submissions will be available on the APSIPA ASC 2024 website. The status page indicates successful receipt of a submission and electronic copyright form, whether the submission has passed formatting inspection, and whether the submission is accepted.
- Submissions will be reviewed by experts selected by the conference committee for their demonstrated knowledge of particular topics. The progress and results of the review process will be posted on this website and authors will also be notified of the review results by email.
- If your manuscript is accepted, you must register to attend the conference by October 13, 2024 and present the paper. If these qualifactions are met, the manuscript will be published in the official proceedings distributed at the conference, and online through IEEE Xplore.
- June 24, 2024
Submission Deadline of Special Session
Submission Deadline of Proposals for Forum, Panel and Tutorial July 21August 5, 2024
Submission Deadline of Regular Paper & Special Session Pape- September 25, 2024
Notification of Regular and Special Session Paper Acceptance - October 13, 2024
Submission Deadline of Camera Ready Paper
Deadline of Early Bird Registration (Author shall complete online registration before Oct. 13)
The review process is being conducted entirely online. To expedite the review process, and to assure that the paper submissions will be readable through the online review system, we request that authors submit manuscripts that are formatted according to the Paper Kit instructions included here. For similar reasons, authors are strongly encouraged, though not required, to format the submissions using these tools as well.
Deadlines and Important Dates
Correspondence
Please make sure to put the conference name (APSIPA ASC 2024) and the paper number that is assigned to you on all correspondence.General Instructions
Use the LaTeX or MS Word templates in The Template.Prepare your paper in full-size format, on A4 paper (210mm by 297mm). Write the paper in English.
We kindly ask authors to check your paper if all fonts in the PDF file of the manuscript are embedded and subset. It can be checked from Document Properties/Fonts in File menu of Adobe Acrobat.
Document Formatting
A. Paper LengthThe length of the regular paper is limited to 4-6 pages (including everything). Please DO NOT put a page number on each page. Please DO NOT put a page number on each page.
B. Type Sizes and Typefaces
Follow the type sizes specified in Table I. As an aid in gauging type size, 1 point is about 0.35 mm. The size of the lowercase letter “j” will give the point size. Times New Roman is the preferred font.
C. Margins
top = 19mm, bottom = 43mm and left = right = 13mm. The column width is 8mm (3.45 in). The space between the two columns is 4mm (0.17 in). Paragraph indentation is 3.5 mm (0.14 in).
D. Style
The style of the paper is single-spaced two-column format like this sample. Left- and right-justify your columns. Use tables and figures to adjust column length. On the last page of your paper, adjust the lengths of the columns so that they are equal. Use automatic hyphenation and check spelling. Digitize or paste down figures.
E. The First Page
Center the title across both columns at the top of the first page, followed by authors' names and their affiliations. Long title should be typed on two lines without a blank line intervening. The two-column format should start with the abstract. Type the abstract at the beginning of the left column in the first page, leaving approximately 1 cm (0.39 in) from the title part. The abstract should be the same as that submitted electronically on the symposium website.
The review process will be performed from the electronic submission of your
manuscript. To ensure that your document is compatible with the review system,
please adhere to the following compatibility requirements:
Please make sure that you submit a valid PDF to the submission system. Adobe Acrobat is the preferred way of generating a PDF file, but there are many other options which produce quality PDFs as well.
PDF files:
ALL FONTS MUST be embedded in the PDF or PostScript file. There is no guarantee that the reviewers of the abstract have the same fonts used in the document. If fonts are not embedded in the final submission, you will be contacted by the secretariat and asked to submit a file that has all fonts embedded. Please refer to your PDF or PS file generation utility's user guide to find out how to embed all fonts.
PDF files with Postscript Type 3 fonts are highly discouraged. PDF and PostScript files utilizing Type 3 fonts are typically produced by the LaTeX system and are lower-resolution bitmapped versions of the letters and figures. It is possible to perform a few simple changes to the configuration or command-line to produce files that use PostScript Type 1 fonts, which are a vector representation of the letters and figures.
For most installations of LaTeX, you can cause dvips to output Type 1 fonts instead of Type 3 fonts by including -Ppdf option to dvips. The resulting PDF file will reference the Type 1 Computer Modern fonts, rather than embedding the bitmapped Type 3 versions, which cause problems with printers.
You may also need to tell dvips to force letter sized paper with the option: -t letter.
Some LaTeX installations also include pdflatex, which produces acceptable PDF files as well.
ALL authors must be entered in the online form, and must appear in the online form in the same order in which the authors appear on the PDF.
After you submit this information, the system will display a page with the data that you entered so that you may verify its accuracy. If you need to change the data to fix a mistake, you can revise it any time before the deadline of paper submission. At the end of a successful upload, an email message will be sent to the corresponding authors' email addresses to confirm that the file has been uploaded. If you do not receive the email, we may not have successfully received your file upload. If you encounter trouble, contact the paper submission support at: apsipa2024@um.edu.mo.
The notification email may include comments from the reviewers and/or program committee members. The conference cannot guarantee that all of the reviewers will provide the level of detail desired by you. However, reviewers are encouraged to submit as detailed comments as possible.
Because of the short amount of time between paper acceptance decisions and the beginning of the publication process, APSIPA ASC 2024 is not able to allow for a two-way discourse between the authors and the reviewers of a paper. If there appears to be a logistical error in the reviewer comments, such as the reviewer commenting on the wrong paper, etc., please contact APSIPA ASC 2024 at apsipa2024@um.edu.mo.
Continuing in 2024 Publication in the Proceedings: All accepted submissions, with an author registered, and which are presented on-site, will be published in the proceedings (IEEE Xplore).
File Format
Papers must be submitted in Adobe's Portable Document Format (PDF) format.Please make sure that you submit a valid PDF to the submission system. Adobe Acrobat is the preferred way of generating a PDF file, but there are many other options which produce quality PDFs as well.
PDF files:
- must not have Adobe Document Protection or Document Security enabled,
- must have 'A4' sized pages,
- must be in first-page-first order, and
- must have ALL FONTS embedded and subset.
ALL FONTS MUST be embedded in the PDF or PostScript file. There is no guarantee that the reviewers of the abstract have the same fonts used in the document. If fonts are not embedded in the final submission, you will be contacted by the secretariat and asked to submit a file that has all fonts embedded. Please refer to your PDF or PS file generation utility's user guide to find out how to embed all fonts.
Information for LaTeX users
Generating a PostScript file is straightforward for all LaTeX packages we are aware of. When preparing the proposal under LaTeX, it is preferable to use scalable fonts such as Type I, Computer Modern. However, quite good results can be obtained with the fonts defined in the style file recommended above (spconf.sty).PDF files with Postscript Type 3 fonts are highly discouraged. PDF and PostScript files utilizing Type 3 fonts are typically produced by the LaTeX system and are lower-resolution bitmapped versions of the letters and figures. It is possible to perform a few simple changes to the configuration or command-line to produce files that use PostScript Type 1 fonts, which are a vector representation of the letters and figures.
For most installations of LaTeX, you can cause dvips to output Type 1 fonts instead of Type 3 fonts by including -Ppdf option to dvips. The resulting PDF file will reference the Type 1 Computer Modern fonts, rather than embedding the bitmapped Type 3 versions, which cause problems with printers.
You may also need to tell dvips to force letter sized paper with the option: -t letter.
Some LaTeX installations also include pdflatex, which produces acceptable PDF files as well.
Electronic Paper Submission
When you have your document file ready, gather the following information before entering the submission system:- Manuscript in PDF format
- Affiliation, email address, and mailing address for each author
- Paper title
ALL authors must be entered in the online form, and must appear in the online form in the same order in which the authors appear on the PDF.
After you submit this information, the system will display a page with the data that you entered so that you may verify its accuracy. If you need to change the data to fix a mistake, you can revise it any time before the deadline of paper submission. At the end of a successful upload, an email message will be sent to the corresponding authors' email addresses to confirm that the file has been uploaded. If you do not receive the email, we may not have successfully received your file upload. If you encounter trouble, contact the paper submission support at: apsipa2024@um.edu.mo.
Online Review Process
A committee of reviewers selected by the conference committee will review the manuscripts and rate them according to quality, relevence, and correctness. The conference technical committee will use these reviews to determine which papers will be accepted for presentation in the conference. The result of the technical committee's decision will be communicated to the submitting authors by email, along with any program committee comments, if any.Monitor Your Submission Status
After you submit your document, you may monitor the status of your paper as it progresses through the submission and review process by using CMT website.Notification of Acceptance
Authors will be notified of paper acceptance or non-acceptance by email.The notification email may include comments from the reviewers and/or program committee members. The conference cannot guarantee that all of the reviewers will provide the level of detail desired by you. However, reviewers are encouraged to submit as detailed comments as possible.
Because of the short amount of time between paper acceptance decisions and the beginning of the publication process, APSIPA ASC 2024 is not able to allow for a two-way discourse between the authors and the reviewers of a paper. If there appears to be a logistical error in the reviewer comments, such as the reviewer commenting on the wrong paper, etc., please contact APSIPA ASC 2024 at apsipa2024@um.edu.mo.
Continuing in 2024 Publication in the Proceedings: All accepted submissions, with an author registered, and which are presented on-site, will be published in the proceedings (IEEE Xplore).